Projector unresponsive with warning light

Have more questions? Submit a request

Projector bulb issues for lamp and temperature

Lamp is burned out or makes a popping sound:

When the lamp reaches its end of life it may burn out making a loud popping sound,  and you may smell smoke.   If this occurs, immediately submit a help desk ticket where Subject contains request for a replacement lamp.

 

Lamp Warning Light solid amber: 

If the LAMP light is solid amber, submit a help desk ticket requesting a new bulb.  Please indicate that you have a solid amber lamp light in your ticket.

mceclip0.png

 

 LAMP light is blinking amber:

If the LAMP light is blinking amber, the lamp module connection may be disrupted. Please check the lamp module and ensure that it is properly installed. If the LAMP lights and the Power light is blinking amber, the lamp driver has failed and the projector will automatically shut down.  If the LAMP and TEMP lights are blinking amber and the Power light is solid blue, the color wheel has failed and the projector will automatically shut down. To clear the protection mode, press and hold the POWER button for 12 seconds.

 

Temperature light is solid amber:

The projector has overheated. The display will automatically shut down. Turn the display on again after the projector cools down.  If the problem persists, submit a help desk ticket.  Please indicate that you have a solid temp light within your ticket.

mceclip1.png

 

Temperature light is blinking amber:

If the projector fan fails, the projector will automatically shut down. Clear the projector mode by pressing and holding the Power button for 10 seconds.  Wait for about 5 minutes and power up again.  If the problem persists, submit a help desk ticket.  Please indicate that you have a blinking temp light within your ticket.

Articles in this section

Was this article helpful?
26 out of 37 found this helpful